Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Orlando
Electric gate repair in Orlando typically runs $185 – $440 for most common failures, with same-day service available across the metro when a motor, control board, or safety sensor goes down. We’re Arroyo Gate Repair, and automated gates are all we do. Roland Thibodaux leads our team, and we’ve rebuilt, rewired, and retrofitted gate systems from College Park ranches to International Drive commercial properties. If your gate won’t open, won’t close, or keeps reversing for no reason, call us at (877) 851-6955 and we’ll diagnose it over the phone before we even dispatch.
Orlando’s gate repair market is split between two very different worlds that meet nowhere else in quite this way. On one side you’ve got the resort corridor around Walt Disney World, Universal, and International Drive, where automated commercial gates and security barriers at vacation rentals and hotels run 24/7 under punishing humidity and foot traffic. On the other side sits the older residential core, where aluminum driveway gates on 1950s to 1970s ranch lots are getting hammered by St. Augustine grass runners, irrigation overspray, and surge-fried control boards from near-daily summer lightning. We work both worlds, and we carry the parts for each.
Most generalist handymen will take one look at a gate operator with a control board problem and back away. That’s the niche we live in. Electric Gate Repair is our core specialty, not an add-on service. We work on nine major gate operator brands across residential and commercial lines, so when you call us about a LiftMaster, FAAC, Elite, or Mighty Mule system, you’re talking to someone who already knows how that unit thinks.
Why Arroyo Gate Repair Is Orlando’s Preferred Electric Gate Repair Company
Orlando homeowners and property managers call us because we diagnose by system logic rather than trial-and-error. Every gate operator brand has its own failure patterns, its own quirks with humidity and power surges, and its own parts compatibility headaches. Because our techs are fluent across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, we spend less time guessing and less time ordering the wrong part. For a business or HOA that depends on gate access every single day, that faster diagnosis matters.
Our reputation around Orlando comes from the gate-only focus. We’re not a fence company that also does gates. We’re not a general contractor moonlighting in automated access. We repair motors, control boards, keypads, remote receivers, and safety sensors, and we install complete gate systems including the operator, track, and power run. When a Conway homeowner with a 1960s slide gate calls us, we’ve seen that exact gate setup dozens of times before. That’s the kind of local knowledge that makes the repair faster and the quote accurate.
Orlando’s weather shapes the work we do here more than any other factor. The subtropical climate means afternoon thunderstorms almost daily from June through September, and hurricane season stretches from June through November. Lightning strikes take out control boards and handset receivers constantly. Salt-heavy, wind-driven humidity seizes hinges and corrodes operator internals. Sandy soils and irrigation-heavy lawns shift gate posts and bury track systems over time. A repair that’s done wrong against those conditions fails fast. We build for the environment we’re working in.
Styles & brands we work with
Gate Access Control in Orlando
Gate access control in Orlando is the integration work that makes your gate actually decide who gets in: keypads, telephone entry systems, card readers, intercoms, vehicle detection loops, and the wiring that ties them to the operator. In a city with as many gated HOA subdivisions and vacation-rental properties as Orlando, this is half the calls we run. A gate that opens mechanically but won’t respond to a keypad or a remote isn’t a gate problem, it’s an access control problem, and it usually lives in either the control board input terminals or the receiver antenna path.
Keypad and remote receiver diagnostics
When a keypad stops working, the first thing we check is whether the control board is even registering the input. Orlando’s humidity corrodes keypad contacts and antenna connections faster than drier climates. On systems where the remote works but the keypad doesn’t, or vice versa, the fix is usually a receiver swap or a reprogram, not a whole new operator. On older Linear and DoorKing setups around Orlando, we frequently replace just the receiver module and have the system running again that afternoon.
Vehicle detection and safety loops
In Orlando’s sandy soil, vehicle detection loops buried in the driveway take a beating. Shifting ground and irrigation-saturated earth crack loop wire over time, so the gate stops sensing cars and either won’t open on approach or won’t hold open long enough. We run new loop circuits and tune sensitivity, so the gate doesn’t close on a car or swing into a pedestrian. This is especially common in older College Park and Conway driveways where the original loops were laid decades ago.
Commercial Gate Operator in Orlando
A commercial gate operator in Orlando is a different animal from a residential swing-arm opener. These are motorized slide gates, barrier arms, and high-cycle swing operators running at hotels, vacation rental compounds, apartment complexes, and warehouse lots, many of them cycling hundreds of times a day. Orlando’s resort corridor around International Drive and the Disney-adjacent rental districts concentrates this wear in a way few other cities experience. A hotel entrance gate that cycles 300 times daily needs a commercial-duty operator with a duty cycle rated for that workload, and it needs preventive maintenance, not just emergency response.
High-cycle operator maintenance
Commercial operators near the parks run all day, every day. That means drive belts wear, limit switches drift, and gearboxes run hot. We service FAAC, BFT, and DoorKing commercial units and keep the common wear parts on the truck. A property manager who calls us about a gate grinding or slamming at a rental complex near Universal usually gets a same-day mechanical adjustment and a written list of what’s going to fail next if it isn’t addressed.
Security gates and barrier arms
For HOAs, apartment communities, and resort parking areas, a failed barrier arm or security gate isn’t a nuisance, it’s a security exposure. We repair and replace motors, chain drives, hydraulic operators, and access control hardware on commercial security gates across Orlando. When a gate goes down at an entrance, we treat it as a priority call and work with your property staff to get access restored and the system verified safe before we leave.
Trusted Brands We Service in Orlando
We work on nine gate operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That range covers everything from a DIY Mighty Mule opener on a Winter Park driveway to a FAAC commercial hydraulic operator on a hotel entrance. For Orlando customers, that breadth means one call handles the whole property whether the gate is residential or commercial, old or new. We stock common boards, receivers, remotes, and safety sensors for the brands we service in our Orlando inventory, which means faster turnaround on repairs than waiting on a distributor shipment. If your gate runs on a brand a local handyman has never heard of, we’ve probably already fixed one that week.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Orlando Homes
- Surge-damaged control boards: Orlando’s summer lightning storms hit gate operators hard, especially older systems with legacy boards that are now obsolete. We replace the board, add surge protection, and get the gate cycling again without ripping out the whole operator.
- St. Augustine grass choking the track: In neighborhoods like College Park, Conway, and Winter Park, St. Augustine runners creep under and into sliding-gate tracks and swing-gate paths constantly. The gate literally won’t close because the lawn grew into it. We clear the track, realign the rack and pinion, and reset the limit switches so the gate stops fighting the grass.
- Wind-loaded and salt-humidified hinges: After a tropical storm or a long humid summer, gate hinges seize and bind. The real failure is usually at the hinge post, not the gate panel itself. We replace worn hinge bearings and realign the gate so it swings true before the motor gets destroyed fighting the resistance.
- Failing safety photocells: Older Orlando gates were often hung before photo-eye safety standards were common. On systems where the gate keeps reversing or won’t close at all, the photocell is usually dirty, misaligned, or dead. We replace and realign them, which also brings the gate closer to current safety practice.
Pricing for Electric Gate Repair in Orlando, FL
Electric gate repair in Orlando runs a wide range depending on what failed. A remote control replacement runs $45 – $85. A keypad repair or replacement runs $95 – $185. Safety sensor replacement runs $120 – $220 per pair. A control board replacement runs $185 – $440 depending on the brand and whether the unit is residential or commercial. A gate motor replacement runs $350 – $850 for most residential operators, and closer to $1,200 – $2,600 for commercial high-cycle units. If you have an older gate where multiple components are failing at once, a full operator retrofit often makes more sense than patching obsolescence piece by piece. We’ll tell you that honestly. Every quote is given and agreed upon before any work begins. Call (877) 851-6955 for a free estimate.
We Also Serve Cities Near Orlando
Electric Gate Repair in Orlando keeps us busy, but our service area covers the surrounding communities too. We take calls in Conway, Azalea Park, Belle Isle, and Edgewood regularly. If you’re in one of those areas with a gate that won’t move or a keypad that ignores you, call (877) 851-6955 and we’ll get a tech routed your way.
Serving Orlando, FL — Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Orlando
Older gates in Orlando that were installed before modern safety standards were introduced are common, especially on 1960s and 1970s ranch lots in College Park and Conway. While current UL 325 safety standards require photo-eyes or an equivalent reversing mechanism on new installations, we will repair an existing gate that lacks them. We’ll also recommend adding them, because a gate that reverses correctly on obstruction is safer for kids, pets, and delivery drivers. The upgrade usually runs $120 – $220 per sensor pair, installed.
Yes, in many cases we can replace an obsolete control board with a modern equivalent and keep the original gate panel and mechanicals in service. Boards for older Linear, LiftMaster, and Elite units often have direct retrofit replacements that fit the same enclosure. Where the operator’s motor or gearbox is also near the end of its life, we’ll tell you honestly that a new operator is the cheaper long-term answer rather than spending on a board now and a motor six months from now. Call (877) 851-6955 for a straight diagnosis.
The most common summertime cause in Orlando is thermal overload. When a gate operator’s motor or control board overheats, especially during the hot afternoons after weeks of near-daily storms, the unit can trip its safety circuit and stop mid-cycle. Another summer culprit is track obstruction from St. Augustine grass growing thicker in the rain, which makes the motor draw more current and shut down. We test the current draw, clear the track if needed, and check the motor’s thermal protection so you know which problem you actually have. Call (877) 851-6955 and we’ll sort it out.
Yes. We keep common HOA-conformant operator housings, post caps, and color-matched hardware on the truck for Orlando subdivisions with architectural review requirements. If your HOA requires a specific operator housing color or style, we match it. A gate repaired with the wrong shade or style of hardware can trigger a complaint, so we verify the requirement before the repair. Bring the HOA spec sheet or tell us the subdivision, and we’ll handle it from there.
Yes, commercial gate operators are a core part of our work across Orlando’s resort corridor. Vacation rental compounds, hotel entrances, and apartment communities near International Drive run gates at cycles that would destroy a residential opener within a year. We service FAAC, BFT, and DoorKing commercial units, keep wear parts in stock, and prioritize emergency calls when a security gate goes down at an occupied property. Call (877) 851-6955 to get a tech dispatched.
If your gate is stuck, grinding, or refusing to respond, call us now at (877) 851-6955. We’ll diagnose the problem over the phone, give you a written quote before any work starts, and get your gate running safely again.
Written by Roland Thibodaux, Owner at Arroyo Gate Repair, serving Orlando since the company’s founding.