Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Orlando, FL
Gate installation in Orlando means building for humidity, hurricanes, and HOA architectural boards. We install automatic and manual driveway gates across the city, from 1950s ranch homes in Conway to Mediterranean-revival stucco properties in Hunter’s Creek. The job starts with a free on-site measure and a written quote agreed before any work begins. Call (877) 851-6955 to schedule yours.
Why Orlando Homes Are Different
Orlando’s housing stock is overwhelmingly masonry. In older neighborhoods like College Park, Winter Park, and Conway, gate posts are often mounted to cinderblock columns on ranch lots built between the 1950s and 1970s. In the newer HOA subdivisions east and southeast of downtown, those Mediterranean-style stucco homes from the 1990s and 2000s come with architectural review boards that dictate gate color, height, and style. A repair done with the wrong shade of operator housing in Waterford Lakes or Eastwood can trigger a violation notice, so we keep HOA-conformant hardware specs on the truck.
Then there’s the climate. Orlando’s subtropical weather pattern, with daily afternoon thunderstorms from June through September and hurricane season running into November, produces surge-damaged control boards and lightning-fried handset receivers more than any other failure type. The sandy soil and irrigation-heavy lawns of Orlando also shift gate posts over time and bury sliding track systems under a crust of sand and St. Augustine grass runners. In older neighborhoods, the most common service call we get in summer is literally that the gate won’t close because the lawn grew into the path.
This dual identity, resort-commercial automation near the attractions and suburban-ranch residential gates everywhere else, shapes how we stock parts and schedule work. A hotel access barrier off International Drive needs a different operator than a driveway swing gate in Audubon Park, even if both fail the same week.
Styles & brands we work with
Our Main Orlando Services
Two services carry most of our Orlando call volume, and each has its own dedicated page because the scope is different enough to warrant it.
Gate Repair in Orlando
Our Gate Repair in Orlando work covers mechanical and structural failures: sagging hinges, seized rollers, bent posts, misaligned tracks, and gates that have shifted out of square on sandy Orlando soil. We work on steel, aluminum, and wrought-iron gates across every era of Orlando housing, from mid-century ranch lots to 2000s HOA subdivisions. St. Augustine grass intrusion and irrigation overspray are recurring contributors here, and we adjust and reinforce to account for them rather than just patching the symptom.
Electric Gate Repair in Orlando
Our Electric Gate Repair in Orlando service is the specialist side of the business: motors, control boards, safety sensors, photo eyes, keypads, and remote receivers. Orlando’s lightning season is hard on automation, and we replace more surge-damaged control boards between June and September than the rest of the year combined. Because we work on nine operator brands including LiftMaster, FAAC, BFT, and Linear, we diagnose by system logic rather than swapping parts by guesswork.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Orlando
Gate installation in Orlando is rarely a bolt-in job. The city’s masonry columns, sandy soil, and HOA design rules mean every install starts with a site measure and a hard look at what the gate will bolt to. We also factor in how the gate will handle five months of daily thunderstorms and the wind loads that come with tropical storm season. Whether it’s a single driveway swing gate in Conway or an automated sliding gate for a commercial property near the attractions, we price it up front and build it to hold. For more on the full scope of what we offer, see our Gate Installation page.
Automatic Gate Installation
Signs you need it
You’re opening and closing the gate by hand every time, or the existing operator is beyond economical repair and the gate itself is still sound.
What it costs in Orlando
Automatic gate installation in Orlando typically runs $900 – $2,600 depending on operator class, gate weight, and whether we’re adding a keypad or intercom.
How we do it
We measure the gate leaf and post structure, match the operator to the gate weight and duty cycle, mount the operator and arm, run low-voltage wiring in conduit, set travel limits and force sensitivity, then program remotes and test the full open-close cycle with safety edges in place.
Sliding Gate Installation
Signs you need it
You have a property where a swing gate can’t work, either because the driveway slopes toward the house or there’s no room for a leaf to arc into the yard.
What it costs in Orlando
Sliding gate installation in Orlando typically falls between $1,800 and $5,500, driven by track length, gate weight, and whether the motor is chain-driven or rack-and-pinion.
How we do it
We set the track on a compacted base, anchor the gate posts, hang and level the gate leaf, mount the drive motor and rack gear, set the travel stops and limits, and verify the gate rolls clean with no binding under load.
What Gate Installation Costs in Orlando
| Item | Typical range in Orlando |
|---|---|
| Automatic gate installation | $900 – $2,600 |
| Sliding gate installation | $1,800 – $5,500 |
| Electric gate installation | $1,300 – $4,200 |
How long does a gate installation take in Orlando?
Most residential installs run one to two days on site. Concrete work for new posts or a sliding track base adds a day for curing, and HOA-heavy subdivisions sometimes add design-review lag before we can start.
Do you handle HOA approval for gate installation in Orlando?
We build to your HOA’s architectural specs and can provide the cut sheets and color samples your board requests. The application itself is yours to file, but we’ll hand you everything the review committee asks for. Call (877) 851-6955 for a free measure.
Brands We Service in Orlando
We work on nine operator brands, so when a control board fails on an older LiftMaster or a FAAC actuator seizes on a commercial gate, we diagnose by system logic rather than trial and error. In Orlando we stock boards, arms, photo eyes, and remotes for the most common LiftMaster, FAAC, BFT, and Linear models, which means most repairs don’t wait on a parts order. See our brands page for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Orlando, FL
| Service | Typical range in Orlando |
|---|---|
| Gate repair (mechanical) | $285 – $650 |
| Electric gate operator repair | $375 – $900 |
| Control board replacement | $425 – $1,050 |
| Hinge and roller replacement | $150 – $425 |
| Track repair and realignment | $225 – $550 |
| Sensor or photo eye replacement | $185 – $375 |
| Keypad or intercom install | $350 – $900 |
| Automatic gate installation | $900 – $2,600 |
| Sliding gate installation | $1,800 – $5,500 |
| Electric gate installation | $1,300 – $4,200 |
What pushes a price up in Orlando is usually site conditions: masonry columns that need core drilling, sandy soil requiring deeper footings, or HOA rules forcing specific hardware. Whatever the number is, we quote it in writing and agree on it before any work starts.
Neighborhoods We Serve in Orlando
We run calls across the city daily, from the older ranch streets of College Park and Audubon Park to the big HOA subdivisions like Waterford Lakes, Eastwood, and Hunter’s Creek, and through the resort-commercial corridor near International Drive.
- College Park
- Conway
- Waterford Lakes
- Hunter’s Creek
- Audubon Park
Service Area – Cities Near Orlando
We also cover the smaller cities and unincorporated pockets around Orlando. That includes Conway, FL with its older ranch stock, Azalea Park, FL just northeast of the city, Belle Isle, FL down toward the Conway chain of lakes, and Edgewood, FL south of downtown. If you’re on the edge of the city, call and we’ll confirm your address is in range.
Serving Orlando, FL — Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Orlando
Most Orlando calls can be scheduled the same day or next day, with emergency service available for security failures. If a commercial gate is stuck open on a resort property, we prioritize it. Call (877) 851-6955 and we’ll give you a straight answer on timing.
Most residential driveway gate installations in Orlando do not require a city building permit, but HOA architectural approval is common in the larger subdivisions. We’ll tell you during the measure whether your specific job needs anything filed, and we build to whichever spec applies.
Yes, we cover Orlando and the surrounding cities including Conway, Azalea Park, Belle Isle, and Edgewood. The dispatch radius extends across Orange County, and we’ll confirm your address when you call for the estimate.
Arroyo Gate Repair has served Orlando since 2013, handling residential driveway gates and commercial access systems across the city. If your gate is failing, sagging, or stuck, call (877) 851-6955 for a free estimate and a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Orlando Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Karen Park"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Chris Lawson"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Rohan Reddy