Ghost Controls Gate Repair in Orlando, FL

Ghost Controls Gate Repair in Orlando, FL | Arroyo Gate Repair

We’re an independent Orlando Gate Repair company that services Ghost Controls openers across the region. If your Ghost Controls swing gate is dragging, surging, or dead after a storm, we can usually get it running again the same day with genuine Ghost Controls parts. One thing makes our Ghost Controls work in Orlando different from a generic brand page: we know exactly how this city’s afternoon lightning, sandy soils, and St. Augustine lawns wear these specific actuators and control boards. Call (877) 851-6955 if your gate is stuck.

Call (877) 851-6955

Arroyo Gate Repair works on Ghost Controls residential swing systems full-time, from the TDS2 heavy-duty dual kit to the AXS1 single arm and DTP1 tube-and-post setup. We cover all of Orlando service area including the older ranch neighborhoods and the newer HOA subdivisions. We’re not authorized by Ghost Controls and we don’t represent their warranty. We’re the guys Ghost Controls owners call when the board goes dark and the gate won’t move.

Why Orlando Residents Choose Us for Ghost Controls Service

Most gate companies in Orlando work on one or two brands. We service nine, and Ghost Controls is where we spend a lot of our residential time because so many older Orlando homes run these low-voltage and solar swing arms. Roland Thibodaux, our owner, grew up in College Park and has been working on gates across Central Florida for nearly three decades. He went through the Industrial Technology program at Valencia College and has been tearing down motors, control boards, and actuator arms ever since. We know how a Ghost Controls board should respond when you press the remote, and more importantly, we know what it looks like when a Florida lightning strike or a sandy track has changed that response.

When you call us about a Ghost Controls opener in Orlando, you’re not explaining your gate to a generalist. You’re talking to someone who knows this brand’s board layout, receiver behavior, and arm geometry. We carry genuine Ghost Controls controllers, receivers, and actuators, plus quality aftermarket batteries and solar panels when the OEM part is overkill for the job. If your gate is down, call (877) 851-6955 and we’ll get you diagnosed.

Common Ghost Controls Gate Repair Problems We Solve in Orlando

• Lightning-surged control boards. Orlando gets afternoon thunderstorms almost daily from June through September. A nearby strike sends voltage through the low-voltage line into your Ghost Controls control board and handset receiver. The gate goes completely dead, or worse, the board gets confused and the opener reverses mid-cycle. We diagnose the board before replacing anything, because sometimes it’s the receiver and sometimes it’s the board, and replacing the wrong one costs you twice.
• Solar battery packs that quit overnight. Ghost Controls solar kits are popular on Orlando ranch lots with no power at the gate. But this city’s summer heat and humidity shorten battery life fast. The gate runs slower and slower, then fails halfway through its swing. We test the battery under load and replace it with a pack that actually holds a charge through a Central Florida night.
• Actuator arms binding after tropical storms. When a tropical storm pushes wind against a Ghost Controls arm, the pivot bushings take the load. We see seized and sloppy arms after hurricane season, especially on gates that face east or on post-mounted brackets that have pulled loose because the masonry column shifted in sandy soil.
• Remotes and keypads that lose programming after moisture gets into the receiver. The Ghost Controls receiver gets wet, the handset won’t learn back, and the gate ignores every button you press. We dry and re-seat the receiver, then re-learn the remote or keypad. It usually takes one visit.
• St. Augustine grass clogging the arm path and track. This is an Orlando classic. The lawn grows fast, the irrigation runs every other day, and the grass runners push up under the swing arm or into the sliding track. The gate won’t close because it’s literally fighting the lawn. We clear the path, adjust the limits, and show you where to trim so it doesn’t happen again next month.

Ghost Controls Service in Orlando: What Local Conditions Mean for Your Equipment

Orlando’s older residential core, from College Park to Ghost Controls in Conway and Audubon Park, was built mostly between the 1950s and 1980s on sandy, irrigation-heavy lots. Those lawns are St. Augustine grass, and St. Augustine runs. It creeps under gate paths, buries swing arms over a single summer, and the sprinkler heads that keep it green push sand sideways into the exact spots where your Ghost Controls post brackets sit. A gate that was plumb in April can be off by half an inch in September, and half an inch at the post is enough to make a Ghost Controls AXS1 actuator strain every single cycle. In College Park we were called to a ranch-lot driveway gate that had stopped closing. The Ghost Controls arm wasn’t bad; it was fighting a post that grass runners and a misaimed irrigation head had shoved out of plumb over the summer. We reset and re-plumbed the post, cleared the arm path, re-learned the limits, and swapped a battery that was no longer holding a charge. The gate has run clean through the rainy season since. That’s the Orlando Ghost Controls repair pattern: the mechanism is usually rebuildable, but the post and the turf are what broke it.

Ghost Controls Models & Products We Service in Orlando

We work on the full Ghost Controls residential swing line you’re likely to see on an Orlando driveway: the TDS2 heavy-duty dual swing kit, the AXS1 single swing opener, the DTP1 dual swing with tube-and-post mount, and the solar panel and battery-backup kit variants. If you’ve got a Ghost Controls remote, keypad, or the bundled exit sensor, we handle those too. We stock genuine Ghost Controls replacement boards, receivers, and actuators in our Orlando repair van, plus aftermarket batteries, solar panels, and hardware for common failures that don’t need OEM. On most Ghost Controls units we repair rather than replace. The arms and controls are straightforward to rebuild. But we’ll tell you straight when a storm-surged board on an aging operator makes a fresh opener the smarter spend. For broader brand coverage, see our Ghost Controls sales & service page. We also handle electric gate repair, battery backups, and smart access add-ons like keypads and phone entry across Orlando.

Ghost Controls Service Pricing in Orlando

Most Ghost Controls repairs in Orlando run between $125 and $350 for the service call and labor, plus parts. Here’s what that usually looks like:

Ghost Controls Repair	Typical Range
Board or receiver diagnostic (no parts)	$95 – $160
Battery replacement (12V or solar pack)	$80 – $180
Actuator arm or pivot bushing replacement	$180 – $320
Post re-plumb and bracket reset	$150 – $280
Complete opener replacement (installed)	$900 – $2,400

The final price depends on whether we’re rebuilding your existing actuator or replacing a surged board, and whether the post has shifted enough to need resetting. We quote the number and you approve it before any work starts. No back-end surprises on the invoice. Call (877) 851-6955 for a free estimate on your Ghost Controls repair in Orlando.

FAQs – Ghost Controls Gate Repair in Orlando

Service Areas Near Orlando

We run Ghost Controls repair calls throughout Orlando and the surrounding neighborhoods: Ghost Controls service in Holden Heights, Ghost Controls service in Edgewood, plus Fairview Shores, Conway, and Pine Castle. If your gate is stuck and you’re within a short drive of Orlando, call us and we’ll get you on the schedule.

Book Your Ghost Controls Service in Orlando Today

If your Ghost Controls opener is down, dragging, or dead after the last storm, call (877) 851-6955 now. We’ll get a technician out, figure out what failed, and quote you a number before any work begins. A gate that sticks or stops isn’t a mystery; it’s just a problem that hasn’t been looked at yet.