Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Conway, FL
Gate installation in Conway, FL means building against ground movement, heavy summer rain, and machinery that takes a beating from lightning and humidity. Most of the work we do in the 32812 ZIP starts with a driveway gate that’s leaned out of level or an opener that quit after an afternoon storm. If the gate won’t budge, sags on its hinges, or the motor hums but nothing moves, call Arroyo Gate Repair at (877) 851-6955 and we’ll get you sorted. We’ve served Conway since 2013.
Why Conway Homes Are Different
Conway is a low-lying, lake-dotted Orlando suburb. The water table sits high, the soil runs sandy, and summer thunderstorms roll in almost every afternoon. That combination does two things to gates: post footings soften and shift, and exposed steel rusts faster than anyone expects. We regularly pull posts in Conway that were set in concrete but have drifted an inch or two out of plumb because the surrounding soil heaved after a wet season. A gate that was perfectly level five years ago will drag on the latch side today, not because the gate failed, but because the ground underneath it moved.
Along the older streets near the lakes, driveways often pitch slightly toward the water. A gate hung level on that grade works for a while, then starts binding as the hinges take the slope load. We re-hang gates in Conway with drainage and footing depth in mind, not just a fresh latch. The housing stock in 32812 is mostly mid-century and 1970s to 1990s single-family homes with real driveway gates. Many are wood or steel on aging posts, and plenty have openers that were installed a decade ago and have since taken direct hits from nearby lightning or surges on the line. In Conway, gate work is as much about re-setting posts and re-hanging against ground movement as it is about fixing latches or motors.
Styles & brands we work with
Our Main Conway Services
Most callers in Conway reach out for one of two things: a gate that won’t open or close, or an automated system that quit working after a storm or a surge. Here’s how each one breaks down.
Gate Repair in Conway
Conway’s repair pattern runs toward leaning posts, rusted hinges, sagging gates, and mechanical latches that no longer line up. A wooden driveway gate on a soaked post leans into the latch and won’t close. A steel gate in lake air rusts through at the hinge plate. We address the gate itself as much as the hardware: re-setting posts, re-hanging leaves, replacing rotted sections, and getting alignment back so the gate swings true. If yours is dragging, stuck, or visibly out of square, start with our Gate Repair in Conway page.
Electric Gate Repair in Conway
Automatic gate openers in Conway live a rough life. Lightning strikes close enough to spike the board, humidity corrodes terminals, and a gate that’s drifted out of level makes the motor work against its own safety limits. We diagnose by system logic across the brands we carry parts for, so a dead opener doesn’t become a parts-swapping exercise. If the keypad clicks and nothing moves, or the gate reverses for no reason, the right page is Electric Gate Repair in Conway.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Conway
New gate installation in Conway succeeds when the footing and drainage are done for this soil, not generic Florida soil. A driveway gate set a decade ago often leans not because the gate failed but because the sandy, high-water-table ground shifted under the post. We install gates with deeper footings and a plan for where the water goes when it storms.
For a full look at the service beyond Conway, see Gate Installation. Here’s what it looks like on the ground in 32812.
Automatic Gate Installation
Signs you need it
You’re still opening the driveway gate by hand every time it rains, or an old opener has failed and the replacement parts no longer fit what’s there.
What it costs in Conway
Automatic gate installation in Conway typically runs $2,800 to $9,000, moving with opener size, gate weight, and whether power already reaches the post.
How we do it
We confirm the post layout, set or strengthen the footings, mount the operator and arms, run and protect the power and safety circuits, and dial in the travel and force settings.
Driveway Gate Installation
Signs you need it
The existing driveway gate has rot at the post base, the frame is twisted, or the gate simply doesn’t match the property anymore.
What it costs in Conway
A new driveway gate in Conway generally lands between $1,500 and $6,000, depending on width, material, and whether it swings or slides.
How we do it
We measure the opening and grade, pull or re-set posts as needed, hang the new gate with proper drainage clearance, and align the hardware so it operates smoothly.
What Gate Installation Costs in Conway
| Item | Typical range in Conway |
|---|---|
| Automatic gate opener and control system | $2,800 – $9,000 |
| New driveway gate (materials and hang) | $1,500 – $6,000 |
| Full gate installation with automation | $4,000 – $12,000 |
Two things push a Conway install above the basic range: a soft post area near a lake or low spot requiring deeper footings, and an electric run that has to be trenched from the house instead of fed from an existing post circuit. We quote the whole job before we start, and nothing gets done until you’ve approved the number.
Does a new gate installation in Conway need a permit?
Conway sits within Orange County and Orlando’s planning jurisdiction, and a driveway gate with automation will often need a permit because the opener and safety edges fall under electric and building review. We handle the permit set for the installs we run; it’s part of the job, not an extra surprise.
How long does gate installation take in Conway?
Most residential driveway gate installs in Conway finish in one to two days once materials arrive and footings are set. Custom sizes, automated sliding systems, or a new power run can add a day or two. Call (877) 851-6955 and we’ll give you a real schedule with a written price.
Brands We Service in Conway
We work on LiftMaster, FAAC, Elite, and Mighty Mule systems across Conway, among the nine major brands we stock parts for. Keeping boards, remotes, arms, and safety edges on hand for those lines means most repairs don’t wait on a distributor. See our brands for the full roster.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Conway, FL
| Service | Typical range in Conway |
|---|---|
| Gate repair, mechanical (hinges, latch, steel gate or post repair) | $150 – $500 |
| Automatic opener repair (troubleshoot and part replacement; not board or motor) | $150 – $500 |
| Electric gate repair, serviced (operator, loop, safety cell, wiring) | $200 – $600 |
| Automatic gate opener repair (residential swing or slide) | $200 – $800 |
| Electric gate repair, installed (motor, gate arm, keypad, solar upgrade, lock) | $400 – $2,500 |
| Control board replacement, residential | $300 – $900 |
| Control board replacement, commercial | $500 – $1,800 |
| Gate opener installation (residential) | $500 – $2,500 |
| Automatic gate opener and control system installation | $2,800 – $9,000 |
| New driveway gate (materials and hang) | $1,500 – $6,000 |
| Full gate installation with automation | $4,000 – $12,000 |
Conway prices climb when a post has to be re-set in lake-soft soil or the job turns into a trenching run for new power. Whatever the number looks like, it’s agreed before work starts. No open-ended invoices.
Neighborhoods We Serve in Conway
We work the full 32812 ZIP and the surrounding streets. Whether the gate is on a quiet lake loop or a newer infill lot, the pattern is the same: ground movement and moisture work the posts harder than the gate itself.
- Conway proper, including streets south of Lake Conway and east of Crystal Lake
- The lakefront and near-lake blocks off Conway Road and Hoffner Avenue, where grades run toward the water
- Belle Isle side of the line where driveways back to canals
- Edgewood and the streets around Lake Jessamine
- Pine Castle and the older mid-century lots near Lake Gatlin
Most Conway calls get a same-day or next-day visit for repairs. Installations are scheduled around material lead times and the permit office.
Service Area – Cities Near Conway
Conway sits in the middle of our greater Orlando service area. We also run regular routes into Orlando, FL, the lakefront streets of Belle Isle, FL, the tight lots of Edgewood, FL, and the older neighborhoods of Azalea Park, FL.
Serving Conway, FL — Our Local Coverage Area
We’re based in the Conway area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Conway
For a gate stuck open or closed in Conway, we aim for same-day or next-morning response, especially when it’s a security gate that can’t be left open. Call (877) 851-6955 when it happens and we’ll put a truck in your direction.
If your Conway neighborhood has an HOA, the gate’s height, material, and operator placement usually need architectural review before we install. We build to the board’s spec once you have the approval letter, and we’ll tell you what to request.
We cover all of 32812 plus the surrounding Orlando suburbs, including Belle Isle, Edgewood, Pine Castle, and Azalea Park. If you’re just outside Conway, call (877) 851-6955 and we’ll confirm the route.
If your Conway gate is leaning, stuck, or dead after a storm, call Arroyo Gate Repair at (877) 851-6955 for a free estimate. We’ll diagnose it right the first time and quote the work before anything starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Conway Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Yolanda Hernandez"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Robert Delaney"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Colleen Sullivan