Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Gate Repair in Conway, FL | Arroyo Gate Repair
We repair Mighty Mule gate openers throughout Conway, FL, and what sets our work apart here is pretty simple: we know how this neighborhood’s soil and storms punish swing gates. An independent Mighty Mule service provider, Arroyo Gate Repair handles everything from fried control boards to leaning posts on MM and FM series operators. Call (877) 851-6955 for a free estimate and we’ll get your gate moving again.

Conway is a lake-dotted, low-lying pocket of Orlando where the water table sits high and the summer storms roll through almost every afternoon. That combination means a Mighty Mule opener in Conway fails differently than the same unit in, say, Winter Park or Doctor Phillips. We’ve spent years learning those local failure patterns so we can diagnose what actually went wrong instead of guessing. Whether you’re off Hoffner Avenue, near the Conway chain of lakes, or tucked into a mid-century street in 32812, our techs know the ground your gate is sitting on. We’re part of the Mighty Mule sales & service team at Arroyo Gate Repair, and we work on these openers every single week.
Why Conway Residents Choose Us for Mighty Mule Service
We work on nine gate operator brands, but Mighty Mule is the one we see most often on Conway driveways. It’s a solid DIY-friendly brand, which means a lot of homeowners install the opener themselves and then, a few years later, something stops talking to something else. That’s where we come in. Roland Thibodaux, our owner, grew up in College Park and cut his teeth on motor controls and structural hardware through Valencia College’s Industrial Technology program. He’ll tell you a gate that sticks or stops isn’t a mystery, it’s just a problem that hasn’t been looked at yet.
We’re a gate-only operation. We don’t do fences, garage doors, or general handyman work. That focus means our techs understand Mighty Mule’s control logic, limit switches, and receiver modules well enough to trace a problem to its source rather than swapping parts until something works. For Conway homeowners, that translates to fewer return trips and fewer unnecessary part replacements.
We stock Mighty Mule-compatible components locally for faster turnaround. When a control board is truly fried, we use OEM Mighty Mule boards because reliability on a gate that secures your driveway isn’t negotiable. For hinges, arms, and batteries, we carry quality aftermarket options that meet or exceed OEM specs and cost less.
Styles & brands we work with





Common Mighty Mule Gate Repair Problems We Solve in Conway
Here’s what we see most often on Mighty Mule systems across 32812. Most of these are directly tied to Conway’s climate, soil, or housing stock.
- Surge-damaged control boards. A lightning strike within a mile or two sends a spike through the power line and into your Mighty Mule’s board. Conway sees near-daily summer thunderstorms, so this is the single most common Mighty Mule failure in the area. We replace the board, verify the receiver module, and often recommend a surge protector on the opener circuit.
- Limit switches and encoder boards failing from moisture. Mighty Mule’s MM series uses limit switches that sit close to the actuator. Conway’s humidity and heavy rains push moisture into these assemblies, and over time the contacts corrode. Your gate will open halfway or refuse to stop in the right position. We replace the switch and seal the housing.
- Rusted or seized operator arms and hinges. The older steel driveway gates common on Conway’s 1970s and 80s homes are prime candidates for rust. Add the subtropical heat and lake air, and the hinge pins seize. The Mighty Mule motor then strains, draws extra current, and eventually trips or burns out. We free or replace the hardware and re-check the motor’s current draw.
- Post settling and gate sag on lakefront driveways. This one is more about Conway’s geography than the opener itself, but it kills Mighty Mule systems just the same. Sandy, high-water-table soil lets gate posts shift. The gate drifts out of level, the actuator binds, and the operator works itself to death. We reset posts with drainage in mind, not just a new latch.
- Battery backup and solar systems underperforming. Mighty Mule battery backups get drained fast during prolonged stormy spells. If the battery sits too long in a low-charge state, it sulfates and won’t hold a charge. We test the battery under load, and if it’s weak, we replace it with a compatible unit sized for the opener’s draw.
Mighty Mule Service in Conway: What Local Conditions Mean for Your Equipment
Along the older streets near Lake Conway and the smaller lakes that dot this area, driveways often slope gently toward the water. A Mighty Mule swing gate that was set perfectly level at installation will drift out of alignment within a few seasons because the footings are sitting in sand that gets saturated every storm season. The post doesn’t fail all at once. It leans, slowly. The gate starts dragging at the latch side, the Mighty Mule actuator strains, and then the motor or a limit switch gives out. Homeowners blame the opener. In our experience, half the time it’s the ground underneath it.
That’s why our technicians in Conway re-hang gates with footing depth and drainage as the first consideration. We don’t just replace the latch and call it done. We look at how water flows across the driveway, whether the post base is wicking moisture, and whether the concrete pad has cracked from root pressure. Then we decide what the gate actually needs. A homeowner on a quiet street near Lake Conway called us because their Mighty Mule MM360 would open halfway and stop. After a lightning storm, the control board was sending erratic signals. We replaced the surge-damaged board, re-leveled the sagging gate post that had settled into the sandy soil, and added a battery backup so the next power blink wouldn’t leave them locked out.
Mighty Mule Models & Products We Service in Conway
We work on the full Mighty Mule residential lineup. That includes the MM260 and MM360 series swing openers, the MM571W and MM572W dual swing operators, and the FM600 and FM700 slide gate operators. We also service Mighty Mule access control keypads and wireless intercoms, which are common on Conway rental properties and home-based businesses.
For parts, we keep a straightforward policy. Control boards and motors: OEM Mighty Mule. Hinges, arms, actuator seals, and batteries: quality aftermarket when they meet or exceed the original spec and save you money. It’s honest advice. If your motor shell is rusted through, we’ll tell you it’s time for a new operator rather than patching it for six months. If the core is sound, we’ll repair it.

See the difference
Before
After
Before
After
Before
AfterMighty Mule Service Pricing in Conway
You’ll get a black-and-white price before we start. Nothing gets quoted after the work’s underway. Typical Mighty Mule control board replacement in Conway runs $180 to $340 depending on the model and whether the receiver module also took a hit. Limit switch and encoder board work usually lands between $120 and $210. Full gate re-leveling and post reset, including re-hanging and actuator alignment, spans $350 to $800 depending on how far the post has moved and what the footing looks like once we dig down. Battery backup replacement runs $85 to $160 for most Mighty Mule units.
What drives the cost in Conway is soil. If your post has settled into saturated sand, we’re not just swapping a part. We’re correcting the footing so the repair holds. A free estimate means we come out, put hands on the gate, and hand you a written number. Call (877) 851-6955 to set that up.
Serving Conway, FL — Our Local Coverage Area
We’re based in the Conway area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mighty Mule Gate Repair in Conway
Why does my Mighty Mule gate opener keep blowing control boards after summer storms in Conway? Because Conway’s afternoon lightning storms push surges down residential power lines, and Mighty Mule boards have a low tolerance for voltage spikes. We replace the board and recommend a surge protector on the opener’s circuit to stop it from happening again. Call (877) 851-6955 for a board test.
My Mighty Mule swing gate opens but won’t close; what’s the most likely cause in this area? In Conway, it’s usually the limit switch or the gate itself binding on a shifted post. Moisture corrodes the switch contacts, or the gate drifts out of level and trips the obstruction sensor on the closing cycle. We check both and replace what’s actually failed. For a same-week appointment, call (877) 851-6955.
How often should I replace the battery in my Mighty Mule gate opener’s backup system? Every two to three years, or sooner if your gate has gone through repeated power blinks during storm season. Conway’s frequent outages run backup batteries hard, and a weak battery fails exactly when you need it. We test batteries under load during any service call and replace them before they strand you.
Can you repair a rusted Mighty Mule gate arm or do I need a whole new operator? We can often save the operator if the motor and board are still sound. The question is the shell. If the arm bracket or hinge tube is rusted through, that’s a structural repair on the hardware side. If the actuator housing itself is compromised, replacement is the smarter money. We walk you through the math before any parts are ordered.
What’s the best way to protect my Mighty Mule gate from lightning damage in Conway? Install a surge protector on the opener’s circuit, make sure the control board housing is sealed, and add a battery backup so the system isn’t fully exposed to every voltage fluctuation. We can do all three in one service visit. Call (877) 851-6955 and we’ll set it up.
Service Areas Near Conway
We cover Conway service area throughout 32812 and run Mighty Mule repair calls to nearby Orlando, Holden Heights, Edgewood, and Fairview Shores. If you’re just outside Conway proper, we likely still get to you the same week. Our Mighty Mule service in Pine Castle and Mighty Mule service in Pine Hills teams handle those neighborhoods with the same local knowledge. As part of our broader Mighty Mule sales and service coverage, we know this part of Orange County well.
Book Your Mighty Mule Service in Conway Today
If your Mighty Mule gate is creeping, stopping halfway, or dead after a storm, call (877) 851-6955. We offer same-week service across Conway and 32812. You’ll get a real diagnosis from a gate specialist and a written price before anything gets touched.
Written by Roland Thibodaux, Owner at Arroyo Gate Repair, serving Conway since 1997.