Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Gate Repair in Orlando, FL | Arroyo Gate Repair
We’re an independent Mighty Mule service provider handling repairs and replacements across Orlando, from College Park ranch lots to gated communities near the resort corridor. Call (877) 851-6955 for a free estimate. Our Mighty Mule work here comes down to one thing most generalist shops miss: Orlando’s humidity, lightning, and St. Augustine grass create failure patterns you won’t find in the operator’s manual, and we’ve been sorting them out for nearly three decades.
Why Orlando Residents Choose Us for Mighty Mule Service
Roland Thibodaux grew up in College Park and went through the Industrial Technology program at Valencia College, where motors, controls, and structural hardware made more sense than anything he’d studied before. That hands-on diagnostic background is what we lean on here. We work on Mighty Mule equipment weekly, and we know the difference between a board that needs replacing and a board that needs a thirty-second reset. We’re not a handyman service that “also does gates” and we won’t guess at your opener. We stock OEM Mighty Mule boards, arms, and receivers when they’re available, and quality aftermarket equivalents for discontinued models. You’ll get a straight answer about what failed and what it costs before we touch anything.
Styles & brands we work with
Common Mighty Mule Gate Repair Problems We Solve in Orlando
- Surge-damaged control boards and receivers. Orlando’s almost-daily June through September lightning storms send voltage spikes straight into Mighty Mule boards, especially older FM200 and FM350 units without built-in surge protection. Gates go dead, start ghost-opening, or stop responding to remotes. We test the board, transformer, and receiver as a unit so you’re not paying for parts you don’t need.
- Seized or stripped actuator arms and hinges. Salt-humidified air and wind loading after tropical storms rust the arm pivot bolts and gate hinges. The operator stalls mid-travel and eventually burns out if it keeps fighting that friction. We replace the worn hardware and re-set the arm geometry so the gate moves cleanly.
- Battery backup and low-voltage transformer failures. Mighty Mule’s small backup batteries cook in Orlando heat and stop holding a charge. When the power blinks out, the gate won’t move. We replace them with sealed units that handle Florida’s attic and box temperatures better, and we check the transformer output to make sure the board is getting clean voltage.
- Obstruction sensor faults from grass encroachment. St. Augustine runners creep under swing paths and into sliding-gate tracks in older Orlando neighborhoods. The sensor trips, the gate reverses, and the homeowner thinks the opener is dying. Half the time it’s the lawn, not the motor.
- Stripped gear and arm failures on HOA subdivision gates. In 1990s and 2000s subdivisions like Waterford Lakes and Hunter’s Creek, Mighty Mule MM360 and MM560 operators handle heavier gates than the original FM200 line was built for. We see stripped internal gears and bent arm brackets. Replacement is straightforward when you know the mounting pattern and column hardware.
Mighty Mule Service in Orlando: What Local Conditions Mean for Your Equipment
Orlando’s gate repair market exists in two different worlds that meet nowhere else quite like this. On one side you have the resort corridor around Walt Disney World, Universal, and International Drive, where automated gates run 24/7 in punishing humidity and salt air. On the other side are the 1950s through 80s ranch and stucco neighborhoods like College Park, Conway Mighty Mule service, and Audubon Park, where aluminum driveway gates sit on masonry columns and get attacked from below. The specific Orlando problem we see in those older neighborhoods is St. Augustine grass runners creeping into sliding-gate tracks and swing-gate paths, week after week during the growing season. The gate won’t close because the lawn literally grew into it. That call shows up for Mighty Mule E-Z Gate slide openers in Conway and for FM350 swing arms in College Park. In HOA subdivisions like Hunter’s Creek, a different issue applies: repairs need hardware that matches the association’s approved spec for operator housing color and style. Wrong shade of green, wrong bracket profile, and the homeowner gets a violation notice. We carry HOA-conformant housing and hardware for the common Mighty Mule models, so the repair passes review without a second visit.
Mighty Mule Models & Products We Service in Orlando
We repair and troubleshoot the full Mighty Mule line you’re likely to find on Orlando properties. That includes the FM200 and FM350 single-swing openers still running on older ranch lots, the heavier-duty MM360 and MM560 swing operators common in HOA subdivisions, and the E-Z Gate slide series seen on wider driveway openings in Conway and east Orlando. We also handle the wireless accessories: FM137 keypads, FM136 intercoms, and battery backups paired with those operators. Parts sourcing works like this: when OEM Mighty Mule boards and arms are available at fair prices, we use them. When a model’s discontinued, we use quality aftermarket equivalents we’ve tested. And when a 15-year-old FM200 needs a board, arm, and backup battery all at once, we’ll tell you honestly whether replacement makes more sense than repair.
See the difference
Before
After
Before
After
Before
AfterMighty Mule Service Pricing in Orlando
Mighty Mule repair pricing in Orlando depends on what failed and which model you have. A basic service call and diagnostic runs $79 to $129. Control board replacement on an FM200 or FM350 typically lands between $180 and $340, installed. Actuator arm replacement runs $150 to $250. Battery backup replacement is $75 to $150. A new keypad or receiver runs $95 to $180. Full operator replacement on a single swing gate, parts and labor, falls between $450 and $900. For slide gate operators, expect $600 to $1,100. You’ll get a written quote before any work begins, and the number we give you is the number you pay. Free estimates means exactly that. Call (877) 851-6955 for a same-week appointment and a precise number.
Serving Orlando, FL — Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mighty Mule Gate Repair in Orlando
Probably, but not certainly. A direct lightning strike or near-strike spike can fry the main control board, but just as often the transformer or a low-voltage fuse took the hit. We test every component on the board path before recommending replacement. If your board is dead, expect $180 to $340 for an OEM replacement installed. Call (877) 851-6955 and we’ll diagnose it on site.
Yes. We keep approved operator housing and hardware specs for the common Mighty Mule models on hand so we can match color, finish, and mounting profile to what the association has on file. The gate gets fixed once, and you don’t get a violation letter a week later.
That’s usually an obstruction sensor trip, not a motor failure. In Orlando, the most common cause is St. Augustine grass runners grown up into the swing path or slide track. We recently serviced an FM350 in College Park with exactly that problem: grass had crept under the gate path and tripped the sensor every cycle, and the original battery backup had also given out after years of Florida heat. We cleared the track, replaced the battery with a sealed unit, and reset the close-force sensitivity. The gate runs a full cycle without stopping now.
We do. Orlando heat kills older Mighty Mule backup batteries fast, so we keep sealed replacements for FM200, FM350, MM360, and MM560 models on the truck. Expect $75 to $150 for the battery and installation. Call (877) 851-6955 for same-week service.
If the board, arm, and battery all need replacing at once, you’re looking at $400 to $500 in parts on a unit that’s already 15 years old. A full replacement installed runs $450 to $900 depending on the model. We’ll show you the numbers for both options on the spot and let you decide. No upsell, just the math. Call (877) 851-6955 for a free estimate.
Service Areas Near Orlando
We run Mighty Mule service throughout the Orlando metro and the neighborhoods just outside the city center. That includes Holden Heights, Edgewood, Fairview Shores, Mighty Mule service in Belle Isle, and Pine Castle. If you’re within 30 minutes of downtown Orlando, we can usually get to you the same week.
For Mighty Mule sales & service anywhere in our territory, we carry the parts that matter for Florida conditions. We cover the full Orlando service area, and we also handle Mighty Mule service in Holden Heights and Mighty Mule service in Edgewood.
Book Your Mighty Mule Service in Orlando Today
A gate that sticks or stops isn’t a mystery – it’s just a problem that hasn’t been looked at yet. Call (877) 851-6955 for a free estimate, and we’ll send a gate tech who knows your Mighty Mule model by name.
Written by Roland Thibodaux, Owner at Arroyo Gate Repair, serving Orlando since 1996.