Frequently Asked Questions - Gate Repair in Orlando, FL
We've answered the questions Orlando homeowners and property managers ask us most about automatic gate repair. If you don't see your question here, call (877) 851-6955 and we'll talk it through.
Pricing & Cost FAQs
Gate repair in Orlando typically falls between $185 and $600 depending on what's failed and how accessible the gate is. Small fixes like a misaligned sensor or a fresh battery run on the low end. A full operator replacement or a bent steel frame repair lands higher. We write up the price before any work begins, so you'll see the full number and approve it before we turn a single wrench. Call (877) 851-6955 for a free estimate, and we'll give you a written quote based on your actual gate, not a generic range.
A new gate operator installed around Orlando usually runs between $850 and $2,400, parts and labor included. The spread comes down to gate weight, swing versus slide configuration, and whether we're upgrading from a basic chain-drive to something like a LiftMaster with battery backup. Neighborhoods like Conway and Pine Castle tend to have older swing gates that need more prep work than a newer slide gate in Winter Park. You'll always get the exact price in writing before the job starts. Call (877) 851-6955 and we'll quote yours.
Photo eye and safety edge sensor repair in Orlando generally costs between $120 and $280. Most of that is the part plus a service call. If the sensor is simply knocked out of alignment from a mower bump or a storm, the fix can be even less. If the wiring has been chewed up or the sensor is old and out of production, we'll quote a compatible replacement before doing the work. You'll know the number in advance. For a firm price, call (877) 851-6955.
We keep the service call simple: the diagnostic visit is free when you proceed with the repair. If you decide not to move forward after we've inspected the gate and quoted the work, a small trip fee applies. That way you're never paying twice just to find out what's wrong. We cover all of Orlando, including Holden Heights, Edgewood, and Fairview Shores, so the trip is short and the diagnostic is quick. Call (877) 851-6955 to schedule a look.
Quotes vary because gates vary widely. A light aluminum driveway gate in Azalea Park costs less to repair than a heavy steel community gate in Pine Hills. Slide gates need rail and roller work that swing gates don't. And the brand matters too: a BFT or FAAC control board is a precision part, while a generic board is cheaper up front. We quote based on what's actually on your property, with the number confirmed before we start. Call (877) 851-6955 and we'll explain exactly what you're paying for.
Service & Process FAQs
Every visit starts with a full inspection of the gate, operator, tracks or hinges, and safety devices. We test the motor under load, check the reverse mechanism, and look at wear on the rollers, wheels, and chain or belt. Then we explain what we found in plain language and hand you a written price before starting any repair. After the work, we run the gate through several full cycles to confirm it stops, reverses, and closes cleanly. Our hours are Monday through Friday 7:00 AM to 7:00 PM, and Sunday 7:00 AM to 7:00 PM.
Often yes, especially for common failures like a gearbox knock, a dead receiver board, or a gate off its track. If we have the part on the truck and your schedule allows, we fix it then and there. If your operator is an older FAAC or a specialty model and we need to order the part, we'll tell you the lead time honestly and handle the install as soon as it arrives. The fastest way to find out is a quick call to (877) 851-6955. We'll tell you what's realistic for your gate.
Most repairs we do around Orlando take between one and three hours on site. Replacing a control board, adjusting a limit switch, or repairing a broken chain is usually under two hours. A full operator swap or a bent gate realignment can run half a day. If we need to order a part like a LiftMaster arm or a BFT hydraulic unit, the labor is still quick once the part is in hand. We'll give you a time estimate with your written quote. Call (877) 851-6955 to schedule.
Yes. We install and repair operators, keypads, card readers, intercoms, and vehicle loop detectors all over Orlando. Whether you need a simple clicker on a residential gate in Orlovista or a full access control retrofit at a small complex in Oak Ridge, we handle the motor side and the entry side. We work with LiftMaster, FAAC, BFT, and Linear equipment regularly, so we know programming and wiring as well as mechanical repair. Call (877) 851-6955 to talk through your setup.
First, check whether the operator has a manual release. Most residential operators have a keyed release or a pull handle that disengages the motor so you can push the gate open by hand. That gets your car out while you wait for service. If the gate is jammed physically, bent, or off its track, don't force it, that can turn a minor track repair into a bent frame or a snapped chain. Call us at (877) 851-6955 during business hours and we'll get you on the schedule. We're open seven days a week, including Sunday, closed Saturdays.
Brands & Parts FAQs
We repair LiftMaster, FAAC, BFT, and Linear operators regularly, plus most other major brands. LiftMaster residential swing and slide openers are common in neighborhoods like Conway and Fairview Shores. FAAC hydraulic operators show up on a lot of Orlando's older iron driveway gates. BFT and Linear gear drives are frequent in HOA and small commercial settings. If your operator is a brand we don't see weekly, we can usually still source parts and handle the repair. Call (877) 851-6955 with your model number handy.
We prefer OEM parts whenever the budget allows, because a LiftMaster board or a FAAC hydraulic seal is built to the exact spec of the operator. But there are times when a quality aftermarket part makes better sense: an older gate with a discontinued board, or a simple bracket where the aftermarket part is functionally identical for less money. We'll always tell you which we recommend and why, with the price either way, before ordering anything. Call (877) 851-6955 to discuss your gate.
Yes, and it's one of the more common jobs we do. Homeowners around Pine Castle and Pine Hills often have an operator from 15 or 20 years ago and want something quieter, faster, or with battery backup for hurricane season. We can swap an old chain-drive for a modern LiftMaster belt unit, or move from a basic FAAC board to one with smart controls. We'll quote the full upgrade with installation, and the price you approve is the price you pay. Call (877) 851-6955 for a free estimate.
In our Orlando service area, the control board fails more than anything else. Lightning strikes in the summer are brutal on gate electronics, and the humidity shortens board life even without a direct hit. After boards, it's usually wheels and rollers, especially on slide gates that run on concrete tracks in sandy soil. Then come photo eye sensors and edge sensors, which take a beating from sun and storms. We keep common boards and sensors stocked on the truck. Call (877) 851-6955 if your gate is acting odd.
It absolutely does. Central Florida heat expands metal, stretches chains, and bakes circuit boards. We see more thermal failure in July and August than any other time of year, especially on black steel gates that soak up sun in neighborhoods like Azalea Park and Holden Heights. Hydraulic operators like FAAC units can run hot and lose pressure in the afternoon. If your gate works in the morning and quits at 3 p.m., it's likely heat-related. Call (877) 851-6955 and we'll sort it out.
Licensing & Insurance FAQs
Every professional working under our name is required to hold the license and insurance their state requires for gate repair and installation work. We carry the proper coverage for work done at residential and light commercial properties throughout Orlando, including Eatonville, Winter Park, and Edgewood. If you need proof of insurance for an HOA board or property manager approval, we'll provide it before we start the job. Call (877) 851-6955 and we'll send over the paperwork.
Most repair work, like swapping a board or replacing rollers, doesn't require a permit in Orlando or Orange County. But if the repair involves moving the gate's footprint, replacing a perimeter gate entirely, or altering the electrical run, a permit may be required depending on the municipality and the HOA's rules. We'll let you know before the work begins whether permitting applies to your situation, and we can usually handle the paperwork coordination. Call (877) 851-6955 to check on your specific gate.
Emergency & Response FAQs
We're open Sunday 7:00 AM to 7:00 PM, and we close on Saturday. If your gate fails on a Sunday, we can typically get someone scheduled that day for urgent situations like a gate stuck open on a busy road or a gate that won't close on a pool code requirement. For Monday through Friday, our hours are 7:00 AM to 7:00 PM. Call (877) 851-6955 to check availability, and we'll be straight with you about when we can get there.
A gate stuck open is a security and liability issue, especially if you have a pool, pets, or kids. If the operator has a manual release, engage it and see if the gate can be walked closed. If it won't budge or it's a heavy slide gate, don't force it, the gate can come off its rail and become a serious hazard. Then call us at (877) 851-6955 as soon as possible. We'll talk through what you're seeing and get the gate secured and repaired. This is a high-priority job for us every time.
The answer depends on our schedule that day and where you're located. We work across all of Orlando, from Fairview Shores to Oak Ridge to Winter Park, and our technicians live spread through the area. When you call (877) 851-6955, a live coordinator will check the local schedule and tell you honestly what's possible, whether that's same day or next morning. We don't overpromise arrival windows we can't hit. You'll know what to expect before we come out.
Our operating hours are Monday through Friday 7:00 AM to 7:00 PM, and Sunday 7:00 AM to 7:00 PM. We are closed on Saturday. If your gate fails outside those hours, leave us a message at (877) 851-6955 and we'll return the call when we open. For a gate that won't close and has created a safety issue, note that in your message and we'll do everything we can to get you scheduled first thing the next available business day.
Warranty & Guarantees FAQs
Yes. We stand behind the repairs we do, and we warranty our workmanship for a full year. If something we fixed fails because of our work, we come back and make it right without charging you again. Manufacturer warranties on parts like LiftMaster operators or BFT boards are separate and we'll walk you through what's covered and for how long. You'll never get a repair from us without knowing exactly what kind of coverage you have. Call (877) 851-6955 with any warranty questions.
Call us right away. If it's the same failure and it's within our one-year workmanship warranty, we come back and fix it at no charge. Sometimes a gate fails in a new way that looks like the old problem, and we'll diagnose that separately and quote it fairly. We'd rather hear from you immediately than have you live with a cranky gate, because repeat failures tell us something bigger is going on. We'll get to the root of it. Call (877) 851-6955 and we'll schedule the return visit.
The workmanship warranty stays with the property for the remainder of the one-year term, so if you bought a home in Orlando and the seller had us repair the gate recently, you're still covered. We just need the address to pull the records. For new operator installations, the manufacturer warranty typically transfers as well, though each brand has its own registration process. If you'd like us to inspect a gate on a home you're buying in Conway, Pine Castle, or anywhere in Orlando, call (877) 851-6955.
Still Have Questions?
We are happy to help. Call us — same-day and after-hours emergency service available.
(877) 851-6955