Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Union Park, FL | Arroyo Gate Repair
We repair Ghost Controls gate operators across Union Park, FL, and we do it as an independent service provider, not a manufacturer-authorized shop. Most Ghost Controls calls we run in Union Park aren’t motor failures at all. They’re post-shift and hinge-bind problems on older ornamental gates that throw the arm geometry out of spec, and we fix those in a single visit. Call (877) 851-6955 for a free estimate.

Arroyo Gate Repair is a gate-only operation. We work on nine major brands, and Ghost Controls is one we see constantly on residential driveway, pool, and yard gates throughout the 32790 ZIP. Our Ghost Controls sales & service work covers the full line, from single swing openers to heavy-duty dual swing kits with solar and battery backup. If you’re in Union Park and your Ghost Controls gate isn’t cycling right, we’ll diagnose it by how the system actually behaves, not by swapping parts and hoping.
Why Union Park Residents Choose Us for Ghost Controls Service
We speak Ghost Controls. Their openers use a specific control logic, arm geometry, and battery architecture that generalist handymen often misread. Roland Thibodaux, our owner, grew up in College Park and spent nearly three decades working gates across Central Florida. He learned motors and controls through the Industrial Technology program at Valencia College, and he’s the reason our diagnostic approach is methodical instead of guesswork. When a Ghost Controls unit in Union Park acts up, we look at the whole system, the operator, the hinges, the post alignment, and the power source before we touch anything, and we bring the same thorough approach to our Winter Park Ghost Controls service.
We’re local to this part of Orange County, so we know what Union Park’s climate does to gate hardware. Sunshine, humidity, and afternoon thunderstorms work on steel and aluminum differently than they do ten miles inland. We stock OEM Ghost Controls control boards, limit switches, and harnesses where available, and we keep quality aftermarket batteries and solar controllers on the truck for faster turnaround on every Ghost Controls service in Azalea Park and throughout the area. You won’t wait a week for a part to ship.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Union Park
- Battery and solar charge-controller failure. Union Park’s summer heat cooks batteries inside solar operator housings. When the battery stops holding a charge, the gate stalls mid-cycle or only opens intermittently. We test the charge controller and replace the battery with a unit rated for Florida’s heat, not a generic shelf pull.
- Control-board corrosion and moisture intrusion. Thunderstorms dump rain fast, and outdoor housings don’t always seal tight after a few seasons. Corrosion on the board causes phantom openings, remote-pairing dropouts, or an operator that refuses to cycle after heavy weather. We open the housing, clean the board, replace it if traces are eaten, and seal the enclosure properly.
- Limit-switch and arm-geometry drift. Decorative aluminum and steel gates in Union Park’s older blocks sit on posts set decades ago. Wet-dry cycles move those posts a few degrees, and the Ghost Controls arm pushes past its set limit. The gate reverses or stops halfway. This is the one we see most often, and it’s rarely a motor problem.
- Frozen or stripped actuator arms and hinge bind. Rust and sag seize hinges on older driveway gates. The opener overloads and throws repeated fault codes. We free and lubricate the hinges, reset the post and arm geometry, and replace the actuator if the thread is stripped.
- Remote and keypad sync loss after storms. Lightning and power surges knock Ghost Controls receivers offline. We re-pair accessories, replace the receiver board if it’s fried, and add surge protection where the wiring allows.
Ghost Controls Service in Union Park: What Local Conditions Mean for Your Equipment
Union Park’s older residential streets are lined with decorative aluminum and steel driveway gates mounted on posts that were set decades ago, long before automation was added. The constant sun and rain cycle moves those posts just enough that Ghost Controls arm geometry drifts out of spec. The opener still works. The gate doesn’t. That’s why a large share of our “motor” calls in Union Park turn out to be realignment and hinge jobs, not motor replacements. A gate that sticks or stops isn’t a mystery. It’s just a problem that hasn’t been looked at yet.
Here’s what that looks like in practice. On a Union Park street off the older residential grid, we were called to a steel double driveway gate with a Ghost Controls dual-swing operator that would open halfway and reverse. The homeowner had already replaced the battery. We found the gate’s center drop-rod and hinges had seized from rust and wet-dry sag, throwing the arm past its limit. We freed and lubricated the hinges, re-set the post and arm geometry, replaced the limit switch, and the Ghost Controls unit cycled cleanly through a full open-close test. The bill was a fraction of what a new operator would have cost.
Ghost Controls Models & Products We Service in Union Park
We work on the full residential Ghost Controls lineup: the Heavy-Duty Dual Swing Gate Opener in both AC and solar configurations, the Single Swing Gate Opener from the TSS1/TDS2 series, solar gate opener kits with battery backup, and Ghost Controls keypad and remote access accessories. If the operator housing is sound, we repair. If a 10-year-old unit has a shot board and a stripped arm, we tell you straight that replacement is the better spend. Our Union Park service area coverage means we usually have common Ghost Controls parts on the truck when we pull up to your driveway.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Union Park
Ghost Controls repair pricing in Union Park depends on what failed. Battery replacement, including the part and install, typically runs $120 to $240. Limit-switch replacement and arm realignment lands between $150 and $300 depending on how far the posts have drifted. Control-board replacement runs $180 to $380 with OEM or quality aftermarket parts. A full solar-battery and controller retrofit is usually $250 to $450. The price is quoted and agreed before any work starts, so you won’t get a surprise invoice after the fact.
Every estimate starts free. We come out, test the operator, check the hinges and post alignment, and tell you exactly what’s wrong and what it costs to fix it. If it’s not worth fixing, we’ll say so. Call (877) 851-6955 to schedule a free estimate in Union Park.
Serving Union Park, FL — Our Local Coverage Area
We’re based in the Union Park area and know this community well, and we also provide Ghost Controls in Goldenrod. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Union Park
Rain exposure followed by hot sun causes the gate’s hinges and posts to swell and shift, which pushes the Ghost Controls arm past its set limit. The operator detects the extra resistance and reverses as a safety response. We realign the arm geometry, free any rusted hinges, and test the limit switch. Call (877) 851-6955 if your gate reverses after storms, and we’ll get it cycling again.
In most cases we replace the battery and test the solar charge controller at the same time. If the controller is still regulating voltage properly, a new battery gets your opener working. We only recommend a full system replacement when the board and actuator are both failed. Call (877) 851-6955 and we’ll test it on site.
Lightning and power surges commonly damage the receiver board inside the operator housing. We open the unit, check the board for burnt traces or moisture, replace the receiver if needed, and re-pair your remotes and keypad. Most remote-pairing repairs in Union Park are done in one visit.
Yes. Union Park has a lot of homes with screened pool enclosures and self-closing safety gates, and we service Ghost Controls operators on those gates regularly. We test the self-closing function, check the battery or AC power, and make sure the gate meets Florida pool-safety requirements for closure force and latch function.
If the motor hums and the gate moves partway before reversing, the operator is likely fine and the arm geometry is off. Realignment costs far less than a new opener. We check post position, hinge wear, and limit-switch settings before recommending any replacement. Call (877) 851-6955 for a free assessment.
Service Areas Near Union Park
We run Ghost Controls service calls throughout Union Park and the surrounding Orange County neighborhoods. Our Ghost Controls service in Maitland covers that city’s residential driveways, and Ghost Controls service in Lockhart reaches homeowners just north of Union Park. We also serve Orlando, Fairview Shores, and Conway.
Book Your Ghost Controls Service in Union Park Today
If your Ghost Controls gate is acting up in Union Park, call (877) 851-6955 for a free estimate. We come out, diagnose the real problem, and quote the repair before any work begins. Same-day service is available for battery and arm-geometry repairs on most residential calls.
Written by Roland Thibodaux, Owner at Arroyo Gate Repair, serving the Union Park area since he founded the company.