Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Orlando?
Gate installation in Orlando typically runs $2,800 to $7,500 for a residential driveway gate with an automatic opener, and $6,000 to $18,000 or more for commercial or high-security systems. A basic manual single-swing gate sits at the low end, around $1,500 to $3,200, while dual-swing driveway systems with access control land in the middle. These ranges cover the gate itself, the operator, and standard install labor for a typical Orlando property.
We’re a gate-only operation, so we’re not guessing at these numbers from a general contractor’s price sheet. We install and service the full spectrum, from Mighty Mule and Ghost Controls residential openers up to FAAC, BFT, and DoorKing commercial operators. That range shapes what we can tell you about cost, because the operator brand you choose moves the total more than almost anything else.
Key Takeaways
- Most Orlando residential driveway gate installs land between $2,800 and $7,500 with automation.
- Manual gates start near $1,500; commercial access systems climb past $18,000.
- Automation adds $900 to $3,500 depending on the operator brand and duty rating.
- Orlando’s sandy soil and heavy summer rain affect post depth and drainage, which adds cost.
- Free estimates are standard; call (877) 851-6955 for a firm number on your property.
Gate Installation Cost Breakdown (2026)
Here’s how our Gate Installation services break down line by line for the Orlando market. Ranges below reflect 2026 pricing for standard materials and typical site conditions. Irregular grade, permits, and access control hardware push the total higher.
| Line Item | Typical Price Range (Orlando, 2026) |
|---|---|
| Manual single-swing gate (aluminum or steel) | $1,500 – $3,200 |
| Manual dual-swing driveway gate | $3,000 – $5,800 |
| Sliding gate (manual, residential) | $2,800 – $6,000 |
| Automatic opener – residential (Mighty Mule, Ghost Controls, Linear) | $900 – $1,800 |
| Automatic opener – pro residential (LiftMaster, Elite, Viking) | $1,600 – $3,500 |
| Commercial / high-security operator (FAAC, BFT, DoorKing) | $4,000 – $12,000+ |
| Keypad, intercom, or access control hardware | $350 – $2,200 |
| Safety sensors and photo-eye setup | $250 – $700 |
| Concrete footings and post setting | $400 – $1,400 |
| Permit and inspection (HOA or county) | $150 – $600 |
| Site prep and old gate removal | $300 – $900 |
What pushes a job up? Brand and duty rating first. A DoorKing operator built for constant commercial traffic costs several times what a Mighty Mule residential opener costs, and that gap shows up on the invoice. Width and weight matter too: a 20-foot sliding gate needs heavier hardware and a more capable operator than a 10-foot swing gate. Automation adds the biggest single jump, because you’re now paying for a motor, a control board, sensors, and access hardware all at once. What pulls it down? A manual gate, standard materials, and a flat, easy site. We’ve seen plenty of Orlando installs stay under $3,000 simply because the homeowner skipped automation on a small side-yard gate.
One thing generalists get wrong: they quote the gate and forget the operator’s duty cycle. A residential opener rated for light use will fail early on a property manager’s busy access point. Getting that match right up front is why we work across nine operator brands instead of shoehorning one into every job.
What Affects Gate Installation Pricing in Orlando
Orlando isn’t a neutral market for gate work. The local conditions change both what we install and what we charge. Here are the factors that move the number most.
- Soil and footing depth. Central Florida’s sandy soil doesn’t hold posts the way clay does up north, so footings go deeper and wider. In low-lying spots near the Conway Chain or the St. Johns floodplain fringe, we plan drainage into the footing to keep a swing gate from sagging after a wet season.
- Hurricane and wind rating. Orlando properties need gates and hardware rated for high wind loads. A heavier, properly braced gate with rated hinges costs more than a decorative light-duty one, but it holds up through named storms and stays on its posts.
- Automation brand and duty cycle. The operator you pick drives a big share of the total. Mighty Mule and Ghost Controls keep a residential install affordable. FAAC, BFT, and DoorKing cost more but handle heavy commercial cycles. We match the operator to how hard the gate actually works.
- Access control complexity. A phone app and a keypad cost far less than a full intercom, vehicle loop, and visitor-logging setup. Multifamily and HOA properties in areas like Baldwin Park or Lake Nona often need the fuller system.
- HOA and county requirements. Orange County permits and many Orlando-area HOA architectural reviews add a step and a fee. Some associations specify gate styles, colors, and setback, which limits material choices.
- Site access and existing concrete. Cutting out an old driveway slab, moving irrigation, or threading a gate between existing walls takes extra labor. A clean, open site keeps the price near the bottom of the range.
How Gate Installation Pricing Works by Gate Type
The gate type sets the baseline before automation even enters the picture. Swing gates are the most common residential choice because they fit existing driveways and need less runway. A single swing works for a narrow driveway; a dual swing covers wider openings and costs more in hardware and operators since you’re automating two leaves. Sliding gates need a clear track area along the fence line, but they’re ideal where a driveway is short or slopes, and they hold up well for commercial entrances that see constant traffic.
Ornamental steel runs higher than aluminum and much higher than basic chain-link, but it also carries more weight, which means a stronger operator and hinges. Vinyl and wood gates sit in the middle on cost and need more upkeep in Orlando’s humidity. When you’re comparing quotes, ask whether the price includes the operator and sensors or just the gate leaf. A number that looks low often stops at the gate and leaves automation off the invoice.
Why the Operator Brand Changes the Price
We service nine operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That range isn’t a marketing line. It’s the reason we can tell you honestly which brand fits your gate and budget instead of selling the one line we happen to stock.
A homeowner with a light-use single swing gate is often well served by a Ghost Controls or Mighty Mule operator, both of which keep the install affordable and are straightforward to service. Step up to a LiftMaster or Elite for smoother operation and better app integration on a busier residential driveway. For a property manager running a gated community entrance or a business with delivery traffic, FAAC, BFT, and DoorKing operators are built for the duty cycle those access points demand. Commercial operators cost more up front but avoid the early failures that come from putting a light-duty motor on a heavy-use gate.
Brand-specific knowledge also keeps long-term costs down. When a technician knows the control logic of a specific operator, diagnosis is faster and fewer parts get swapped on guesswork. That matters whether you’re a homeowner near College Park or a property manager in the tourist corridor.
How to Save on Gate Installation
You don’t need to cut corners to keep the number reasonable. A few practical moves bring the total down without sacrificing a gate that lasts.
- Match the operator to real use. Overbuying a commercial-grade operator for a quiet residential gate wastes money. Undersizing one on a busy entrance costs more in repairs. We size it to how the gate actually works.
- Bundle installation and automation. Installing the gate and the opener in the same visit saves on labor and repeat setup. Doing them separately almost always costs more.
- Plan access control for later. If budget is tight, run the wiring and conduit now for a future keypad or intercom. Adding it later is far cheaper when the infrastructure already exists.
- Handle HOA approval early. Getting architectural review done before ordering materials avoids change orders and re-stocking fees.
- Get a free, itemized estimate. A clear breakdown shows exactly where the money goes and lets you decide what to keep and what to defer. Call (877) 851-6955 and we’ll price your project line by line.
If you’re weighing a new install against repairing what you have, our home page lays out the full range of what we handle, and the Gate Installation in Orlando page goes deeper on the install process itself.
Repair or Replace? When a New Gate Makes More Sense
Not every sagging or stuck gate needs replacing. A worn hinge, a failing operator, or a control board fault is often a repair, and that’s cheaper than a new install. But there’s a tipping point. When the gate frame is rusted through, when the operator is undersized for the traffic and keeps failing, or when you’re paying for repeated service calls on the same system, replacement usually costs less over a few years than patching it together.
We tell Orlando customers the same thing every time: get a diagnosis before you decide. Because we work on the motor, the control board, the sensors, and the mechanical hardware under one roof, we can tell you honestly whether a repair buys you years or just months. That straight answer is worth more than a quick quote. If the honest call is replacement, we install the new system too, so there’s no hand-off to another company.
FAQs – Gate Installation Cost
How much does a driveway gate cost to install in Orlando?
A residential driveway gate in Orlando typically costs $2,800 to $7,500 installed with automation, or $1,500 to $3,200 for a manual single swing gate. Dual-swing and sliding gates land in the middle. Commercial systems climb from $6,000 past $18,000. Call (877) 851-6955 for an exact figure on your driveway.
Is it cheaper to repair my gate or install a new one?
Repairs usually cost $180 to $650 and make sense when the frame and operator are sound. Replacement is the better value, typically $2,800 and up, when the operator is undersized, the frame is rusted, or you’re facing repeated failures. A diagnosis tells you which side of that line you’re on. Call (877) 851-6955 and we’ll give you both numbers.
How much does an automatic gate opener add to the cost?
Automation adds roughly $900 to $1,800 for a residential opener like a Mighty Mule or Ghost Controls, and $1,600 to $3,500 for pro-grade residential operators like LiftMaster or Elite. Commercial operators run higher. The brand and duty rating drive the number. Call (877) 851-6955 to price the right operator for your gate.
Do I need a permit to install a gate in Orlando?
Permits typically run $150 to $600 and often apply to gates near the right-of-way or with electrical automation. Many Orlando-area HOAs also require architectural approval before install. We’ll walk you through what your property needs during the estimate. Call (877) 851-6955 to get started.
Can you install a commercial-grade gate for my property or HOA?
Yes. Commercial and HOA installs in Orlando generally run $6,000 to $18,000+, depending on the operator (FAAC, BFT, DoorKing), access control, and traffic volume. We handle the full system, from the gate and motor to access hardware, so property managers deal with one company. Call (877) 851-6955 for a site assessment.
Get a Free Gate Installation Estimate in Orlando
Gate installation pricing comes down to the gate type, the operator, and the site, and the best way to pin down your number is a free estimate. We give you a clear, line-by-line breakdown so you know exactly what you’re paying for and can plan around your budget. Whether you’re a homeowner replacing an old driveway gate, an HOA upgrading an entrance, or a business tightening access control, we’ll size the system to how hard it works and quote it honestly. Call (877) 851-6955 for a free estimate today. We work on your brand.
Pricing reflects the Orlando market as of 2026. Arroyo Gate Repair offers free estimates – call (877) 851-6955.
What Our Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Colleen Sullivan"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Karen Park"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Chris Lawson