Ghost Controls Gate Repair Service Nationwide

Why Orlando Homeowners Choose Ghost Controls Gate Repair

Ghost Controls in Orlando is what we handle week in and week out at Arroyo Gate Repair, and we do it as an independent shop, not a manufacturer-authorized dealer. That independence means we diagnose what actually failed on your solar or low-voltage swing operator, repair it, and get your gate moving without trying to sell you a whole new unit you don’t need. Most Ghost Controls calls we take are for battery or control board failures that a competent technician can fix in one visit. If your Ghost Controls opener is dead, reversing mid-travel, or ignoring its remotes, call (877) 851-6955 and we’ll tell you what we’re seeing before we even schedule the truck.

Call (877) 851-6955

Ghost Controls built its name on DIY-friendly openers that a homeowner can install with basic tools. The tradeoff is that those systems live outdoors in Orlando’s humidity, afternoon lightning, and relentless plant growth, and after a few years the parts that were easy to install are often harder to diagnose. We’ve rebuilt our Orlando service practice around the TSS1, TDS2, and Architectural Series swing operators because the big commercial gate companies here don’t want the small residential calls, and the generalist handymen don’t understand how the board, battery, actuator, and limits work together. That’s the gap we fill.

We’re not affiliated with Ghost Controls, and we say that plainly. What we are is a gate-only shop with deep brand fluency across nine operator lines, and Ghost Controls is one we know from the battery terminals to the limit magnets.

Why Trust Arroyo Gate Repair for Your Ghost Controls Gate Repair?

Roland Thibodaux, our owner, grew up in College Park and has spent nearly three decades working on gates across Central Florida. He learned motor and control diagnostics hands-on through the Industrial Technology program at Valencia College, and what stuck with him wasn’t the classroom theory. It was the wiring, the torque, the sensor logic. When a Ghost Controls operator misbehaves, the problem is almost always one of three things: power, board, or mechanical binding. Our techs test them in that order and don’t guess.

That’s the difference between a gate specialist and a handyman with a multimeter. A Ghost Controls TDS2 that reverses halfway open looks like a sensor failure, and a lot of guys will sell you a new control board on that assumption. We’ve seen the actual culprit be a rear actuator arm binding on a hinge that sagged after a wet season, tripping the obstruction sensitivity. Replace the board and the gate still reverses. Free the hinge, re-set the limits, and it runs clean. A gate that sticks or stops isn’t a mystery, it’s just a problem that hasn’t been looked at yet.

We stock genuine Ghost Controls control boards, actuators, batteries, and remotes, and we use quality aftermarket solar panels and keypads where the OEM part is overpriced or on backorder. We’ll tell you which is which and why. No vague promises about quality. Just a specific diagnosis and a specific fix.

Common Ghost Controls Gate Repair Problems We Fix in Orlando

• Dead or sluggish solar-charged operator after cloudy stretches. Ghost Controls solar kits depend on a healthy battery and enough sun to keep it charged. In Orlando’s summer storm season, a week of overcast afternoons can drop a marginal battery below the voltage the control board needs. The gate slows, then stops. We test the panel output, the battery under load, and the board separately, because replacing the panel when the battery is sulfated doesn’t fix anything.
• Gate stopped responding to remotes but the keypad still works. This is almost always a receiver or control board input issue on Ghost Controls units, not the remote itself. Lightning season in Orlando is brutal on the low-voltage side of these openers. A near-strike can scramble the receiver circuit while the actuator and motor still test fine. We check the board for surge damage before assuming the remote fobs are dead.
• Actuator arm binding on a sagging swing gate. Orlando’s sandy soils and irrigation-heavy lawns shift gate posts over time. A Ghost Controls swing actuator that worked fine for two years starts straining against a hinge that’s dropped half an inch. The opener reads that resistance as an obstruction and reverses mid-travel. We realign the hinge, re-set the limit magnets, and adjust the force settings. That’s a mechanical fix with an electrical symptom, and it’s the call other shops miss most often.
• Limit-switch and magnet misalignment causing short or overshot travel. Ghost Controls openers use magnetic limit stops on the actuator arm. Vibrations, wind loads from afternoon storms, and kids hanging on the gate can knock those magnets a few millimeters out of position. The gate stops short of closed, overshoots the open stop, or reverses for no visible reason. Re-setting them takes minutes, but diagnosing misalignment beats replacing an actuator that’s still healthy.
• Battery failure after a year or two in Florida heat. Heat kills batteries faster than cold in this climate, especially sealed lead-acid batteries mounted inside a black control box in full sun. We see Ghost Controls units where the battery tests at 11 volts instead of 13, and the opener behaves like it’s possessed: slow travel, intermittent remote response, random reversals. A fresh battery and a solar panel that actually charges it solve most of those calls.

Ghost Controls Parts & Our Repair-vs-Replace Approach

We lean toward repair on Ghost Controls units, and here’s why. The actuator housings and arm geometry on the TSS1, TDS2, and Architectural Series are built to last, even in Orlando’s humidity. What fails first is almost always the battery, then the control board, then the receiver. A board or battery replacement usually restores a healthy operator to full function for a fraction of the cost of a new kit.

We stock genuine Ghost Controls control boards, actuators, batteries, and remotes so we don’t have to quote you a two-week wait while parts ship. For solar panels and keypads, where the OEM markup is steep or the part is backordered, we use quality aftermarket components that match the voltage and connector specs. You’ll always know which we’re using and what it costs before the work starts.

We only recommend a full operator replacement when the actuator housing is cracked, the arm geometry is genuinely worn out, or the owner wants to upgrade from a single-swing to a dual-swing system. If your Ghost Controls opener can be repaired and run clean for another few years in Belle Isle or nearby, that’s what we’ll tell you. Call (877) 851-6955 for a straightforward answer on whether your unit is worth saving.

Our Ghost Controls Service Process – Step by Step

1. 1
   Diagnosis on site. We test the battery under load, check the solar panel output, verify the control board’s power and receiver inputs, and operate the gate manually to feel for hinge or track binding. On Ghost Controls units, power problems and mechanical binding mimic each other, so we separate them before touching anything.
2. 2
   Repair or replacement quote. We tell you exactly what failed, what the fix costs, and whether a part replacement makes sense or the whole operator is done. The price is quoted and agreed before any work starts.
3. 3
   Repair and re-set. We swap the failed part, re-set limit magnets, re-align hinges if needed, and adjust force and obstruction sensitivity to the manufacturer’s operating range. Ghost Controls openers need specific force calibrations for different gate weights and lengths.
4. 4
   Full cycle testing. We run the gate through multiple open and close cycles, trigger the obstruction sensor on purpose, and test all remotes, keypads, and wired controls. A Ghost Controls gate that works once and fails on the tenth cycle isn’t fixed.
5. 5
   Warranty on our work. We stand behind the repair and the parts. If the same issue comes back, we make it right. We also walk you through the manual-release procedure so you can operate the gate by hand during a power or solar outage.

Ghost Controls Products We Service & Install in Orlando

We service and install the full Ghost Controls residential lineup: the Heavy-Duty Single Swing TSS1 family, the Dual Swing TDS2 family, the Architectural Series swing operators, and the solar-charged automatic gate opener kits. That covers single and double driveway gates, both solar and low-voltage AC models, and the remotes, keypads, and vehicle sensors that run with them.

We keep common Ghost Controls parts on the truck, which means most battery, board, and limit-switch repairs happen in a single visit. For installs, we handle the full setup: mounting, actuator arm geometry, limit calibration, and solar panel positioning for Orlando’s sun angles. This is swing gate work, which is the core of what Ghost Controls makes.

We Also Service These Brands

Ghost Controls is one of nine operator brands we work on, not the only one. If you have a LiftMaster on the front gate and a Ghost Controls on the back, or a Mighty Mule on a driveway and a DoorKing on the commercial entrance, one call covers all of it. That range matters when a property manager or HOA board needs a single gate contractor who won’t punt the oddball brand.

FAQs – Ghost Controls Gate Repair Service in Orlando

Book Your Ghost Controls Service in Orlando, FL

If your Ghost Controls gate is acting up, call (877) 851-6955 and tell us what it’s doing. We’ll give you a straight diagnosis over the phone, quote the repair before we touch it, and send a tech who actually knows Ghost Controls systems. Free estimates, Orlando-based, gate-only focus.

Written by Roland Thibodaux, Owner at Arroyo Gate Repair, serving Orlando since he first fixed a neighbor’s sliding gate in College Park.