Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Orlando Homeowners
Gate installation in Orlando runs $1,900 to $11,000 depending on the gate type, automation package, and site prep required. Most Orlando homeowners pay between $3,200 and $6,800 for a complete automated driveway gate with opener, safety sensors, and access keypad. We’re Arroyo Gate Repair, and gates are all we do. Roland Thibodaux leads a team that works on nine major operator brands, so the gate we install is matched to hardware we already know inside and out. Call (877) 851-6955 for a free on-site estimate with pricing agreed before the first post hole is dug.
Automatic Gate Installation
Automatic Gate Installation is the process of pairing a physical gate with a motorized operator, safety edges, and access controls so it opens and closes without manual effort. It’s the right call for Orlando homeowners who want controlled entry to a driveway, side yard, or rear parking area without getting out of the car every time. We install full systems using LiftMaster, FAAC, or BFT operators depending on gate weight, cycle frequency, and power source. A complete Gate Installation in Orlando typically runs $3,000 to $8,500, including the gate, operator, sensors, and basic keypad or remote access. Every quote is itemized and approved before work begins.
Operator Selection
Choosing the right operator matters more than choosing the right gate. A residential swing gate under 400 pounds handles fine on a LiftMaster swing arm. A heavier commercial-style gate at an Orlando HOA entrance needs a FAAC or BFT hydraulic unit rated for continuous cycles. We calculate gate weight, leaf length, and expected daily cycles before recommending anything.
Safety and Code Compliance
Automated gates present real safety risks: entrapment, pinch points, and reversing failures. Orlando follows Florida Building Code for gate automation, requiring photo eyes, contact edges, and proper warning signage on any automated entry. High-tension mechanical components and electrical wiring on automated systems should always be handled by a trained professional. We install compliant systems and test the full reversal sequence before we leave.
Styles & brands we work with
Gate Installation Services
Gate Installation Services cover everything from a simple pedestrian gate to a full driveway entry with intercom, keypad, and vehicle detection loops. We’re not a fencing company that occasionally hangs a gate. We’re a gate-only operation, so the hinges, closure hardware, automation, and access system all come from one specialized team. Our Gate Installation pricing in Orlando ranges from $1,900 for a basic manual residential gate to $11,000 for a full commercial automated entry with operator, safety system, and access integration. Roland Thibodaux and the team quote every project before work starts, so you’ll never see a surprise line item.
Residential Installations
Most Orlando homes use swing gates on concrete or paver driveways. We set the posts in reinforced concrete, account for slope and drainage, and align hinges so the gate doesn’t sag after a Florida rainy season. You choose the material: aluminum, steel, or weld-fabricated ornamental styles.
Commercial and HOA Entry Systems
Property managers in Orlando need gates that cycle hundreds of times a day without overheating. We install heavy-duty operators sized for high traffic, plus access control from simple keypads to telephone entry and transponder systems. The gate is engineered for continuous use, not residential duty cycles.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation
Electric Gate Installation means running power to the gate location, mounting the operator, installing safety sensors and access hardware, and configuring the control board. It’s the part of gate work that general handymen tend to avoid, which is exactly why it’s a core specialty for us. We handle the full electrical scope: trenching for the power run, wiring the control board, and programming remotes, keypads, or intercom systems. Electric gate installation in Orlando runs $2,800 to $7,500 depending on power distance from the panel, gate weight, and access control complexity. We diagnose by system logic so the board is wired correctly the first time.
Control Board Wiring and Programming
Control boards aren’t plug-and-play. Each brand has its own logic for limit settings, obstacle detection, and accessory inputs. We wire and program LiftMaster, FAAC, BFT, and Linear boards to match the specific operator and accessory combo, then run full obstruction tests before calling it done.
Power Run and Trenching
Running power to a driveway gate in Orlando usually means an underground conduit run from the main panel, sometimes 30 to 80 feet. We handle the trenching, conduit, proper depth, and weatherproofing at the operator end so the system doesn’t trip ground faults in Florida humidity. Electrical work on automated gate systems should be left to professionals with gate-specific experience.
Driveway Gate Installation
Driveway Gate Installation is the installation of a gate across a residential or commercial driveway entry point, typically paired with automation for vehicle entry. It’s one of the most visible upgrades an Orlando homeowner can make for privacy, security, and curb appeal. We measure the driveway width, set steel posts in concrete, hang the gate, and install the operator and access controls as a coordinated system. Driveway gate installation in Orlando generally costs $2,500 to $9,000 depending on gate width, material, and automation level. The price is locked before we start, so you can plan with certainty.
Single vs. Double Gate Systems
Driveways under 14 feet wide work well with a single-leaf swing gate. Wider entries, common in Orlando’s newer neighborhoods like Avalon Park and Lake Nona, need a double-leaf setup. We spec the hinge count, post depth, and operator sizing for each configuration so the gate doesn’t warp or drift.
Material and Style Selection
Aluminum is lightweight and corrosion-resistant in Orlando’s humidity. Steel is heavier and stronger, ideal for security-conscious homeowners. We fabricate or order gates in powder-coated finishes that hold up to sun and rain, matching existing fencing where feasible.
Sliding Gate Installation
Sliding Gate Installation is the installation of a gate that rolls horizontally along a track instead of swinging open on hinges. It’s the right choice for Orlando properties with steep driveways, limited swing clearance, or vehicles parked close to the gate path. We build the steel track or V-groove system, set the rollers, hang the gate, and install the operator. Gate Installation in Conway and the greater Orlando area runs $3,500 to $11,000 for a complete automated sliding system, depending on gate length and track foundation requirements. All pricing is itemized and quoted upfront.
Track and Foundation Work
A sliding gate is only as good as its track. In Florida’s sandy soil, the concrete pad under the track needs to be deeper and properly reinforced to prevent settling and misalignment. We pour the pad, set the track at grade, and adjust the rollers so the gate glides instead of grinding.
When Sliding Beats Swing
Sliding gates make sense when a driveway slopes upward immediately past the entry or when a swing gate’s arc would hit a parked vehicle or landscape. They also cover wider openings without the stress of long cantilevered hinges. We assess the site and tell you honestly which configuration fits your property.
Gate Opener Installation
Gate Opener Installation is the mounting and configuration of the motorized operator that drives an automated gate. It includes the operator arm or gearbox, control board, safety sensors, and whatever access system you choose, from a simple remote to a smartphone app. We work on LiftMaster, FAAC, BFT, and Linear openers as our primary installation brands, matching operator capacity to gate weight and usage. Gate opener installation in Orlando, when added to an existing manually-operated gate, runs $1,800 to $5,500 depending on operator class and access features. We give you the price up front, before any hardware is ordered.
Opener Sizing by Gate Weight
Undersized openers burn out. Oversized openers waste money. We weigh the gate, measure the leaf, and calculate wind load, then select an operator with enough reserve capacity for Orlando’s storm season. This is where multi-brand experience pays off: we’re not forcing one opener onto every gate we see.
Access Control Add-Ons
Remotes are the baseline. We also install keypads, intercoms, vehicle loop detectors, and smartphone-based systems through brands like DoorKing and Linear. Each accessory gets programmed into the control board with its own access rules, so you control exactly who gets in and when.
Gate Fabrication
Gate Fabrication is the custom building of a gate to fit a specific opening size, style requirement, or security specification. It’s what we offer when an off-the-shelf gate won’t match the property or won’t hold up. We fabricate steel and aluminum gates in standard and custom dimensions, with finish work like powder coating included. Custom gate fabrication in Orlando varies from $2,000 for a simple steel pedestrian gate to $8,000 or more for a decorative double driveway gate. You get a shop drawing and a firm price before metal is cut.
Custom Sizing and Layout
Stock gates come in set widths. Custom fabrication lets us match an odd-sized opening precisely, which matters on older Orlando properties where driveway widths were never standardized. We measure to the inch, factor in hinge and latch hardware, and fabricate accordingly.
Decorative and Security Grades
Some clients want a simple, strong bar gate. Others want ornamental scrollwork that matches a home’s architecture. We build both, using heavier gauge steel for security applications and architectural finish levels for front-facing installations.
Brands We Service
We install and service LiftMaster openers across residential applications. Their swing arms and chain-driven slide operators are reliable on standard driveway gates, and we stock common boards and accessories for same-week turnaround on most installs.
FAAC and BFT are our go-to lines for commercial-grade automation. These Italian-built hydraulic and electromechanical operators are workhorses for Orlando HOAs and apartment communities where the gate cycles constantly. We know their programming logic and diagnostic sequences well because they make up a significant share of our repair volume.
Linear rounds out our primary installation lineup, particularly where a property manager wants keypad or telephone entry integration without a full commercial control system. Whether you have LiftMaster, FAAC, BFT, Linear, or any other make, we can install, wire, and program it correctly.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Your gate sags and scrapes the driveway. A sagging gate means hinge or post failure is ongoing. Left alone, the operator has to work harder, and the hinges eventually tear out of the post. We can reset or replace the hardware before the gate drops completely.
- The gate reverses or stops mid-cycle. This often points to sensor misalignment, a failing operator capacitor, or a control board fault. Intermittent operation usually gets worse within days. Our diagnostic approach finds the root cause rather than resetting the board and hoping.
- You hear grinding during operation. Grinding from a sliding gate means a bad roller bearing or track alignment issue. From a swing gate, it’s usually the operator arm or hinge joints. Both failures strain the motor and cause premature wear on parts that are cheaper to replace early.
- Your keypad or remote only works sometimes. Intermittent access control is a security problem as much as an annoyance. It often traces to failing wiring, a weak antenna, or a board going bad. We can diagnose and replace access hardware before it leaves you or your tenants locked out.
- The gate was hit by a vehicle or hurricane debris. Impact damage bends the frame, knocks the track out of line, or damages the operator. Running the gate after impact stress-cycles all connected hardware. We assess the full system and repair or replace what’s compromised.
Our Process, Step by Step
- 1
On-site assessment. We come out, measure the opening, check soil conditions, locate the power source, and talk through your access and security needs. This first visit is free and comes with a written scope recommendation.
- 2
Detailed written quote. We itemize the gate, operator, access hardware, power run, and all site work. You approve the number before we order anything. No deposits on hardware until you’ve seen the full breakdown.
- 3
Fabrication or order and site prep. If it’s a custom gate, we build it in our shop. Meanwhile, we pour the post foundations or track pad so the site is ready when the gate is. Site prep and fabrication happen in parallel to keep the timeline tight.
- 4
Installation and wiring. We set the gate, mount the operator, pull the electrical, and terminate every connection. Then we program the control board, pair your remotes and keypads, and set the travel limits and obstruction sensitivity.
- 5
Testing and walkthrough. We cycle the gate repeatedly, test every safety feature including reversal and photo eye function, and walk you through operator controls and basic troubleshooting. You get a clear explanation of what was installed and how to maintain it.
How Much Does Gate Installation Cost in Orlando?
A typical manual gate installation in Orlando runs $1,900 to $4,500, while a fully automated driveway gate with opener, sensors, and keypad lands between $3,000 and $8,500. Sliding gate systems and custom-fabricated ornamental gates push the top of the range to $11,000 or slightly more for complex commercial entries. Factors that change the price: gate width and weight, material (aluminum vs. steel), how far power has to be trenched, diameter and depth of post footings, and which operator brand you choose. You avoid overpaying by getting a line-item quote that separates the gate itself from the automation and site work. Every estimate we give is free, and the price is fixed before we start. Call (877) 851-6955 and we’ll measure your site and give you a written number with no obligation.
Our Service Area Near Orlando
We install gates across the Orlando metro, including Gate Installation in Holden Heights, Gate Installation in Edgewood, Conway, Pine Castle, Fairview Shores, Azalea Park, Winter Park, Eatonville, Oak Ridge, and Orlovista. Site assessments are typically scheduled within 24 to 48 hours, and we schedule installations in a defined window with a clear start time. Since we’re based in Orlando, our truck stock and hardware suppliers are local, which keeps material waits short. If you’re outside the immediate metro, call us and we’ll confirm coverage. Our home page also lists the full range of gate work we handle across Central Florida.
Serving Orlando, FL — Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Orlando
Gate Installation – Azalea Park and throughout Orlando covers the complete process of setting a gate at a driveway or entry point: digging and pouring the post foundations, hanging the gate, installing the operator and safety system for automated gates, and configuring any access controls. It covers everything from a basic manual swing gate to a full commercial sliding entry with intercom and vehicle detection. We handle the entire scope under one specialty team rather than referring parts of the job out.
Most residential gate installations in Orlando take one to two days on-site, depending on the gate type and whether power needs to be trenched from the main panel. Custom fabrication adds a week or two before the install date because the gate is built to your measurements. We give you a clear timeline with the quote, and we hold to it.
Expect $1,900 to $4,500 for a manual gate, $3,000 to $8,500 for an automated driveway gate, and up to $11,000 for a sliding or custom commercial installation. The main variables are gate width, material, operator brand, and how far the electrical run has to go. Call (877) 851-6955 for a free on-site quote with the exact number for your property.
Yes, LiftMaster is one of our primary installation brands for residential driveway gates. We know their swing arm and slide operator lines well enough to size the unit correctly for your gate’s weight and duty cycle. We also install FAAC, BFT, and Linear for heavier or commercial applications.
If your gate is stuck open and the property is unsecured, or stuck closed and you can’t access the property, call us at (877) 851-6955 right away. We prioritize emergency gate situations and can often get a technician to your Orlando property the same day. If a full replacement is needed, we can secure the opening temporarily while the new gate is fabricated or ordered.
Yes, our installation workmanship is warranted, and the operators and access hardware we install carry factory warranties that vary by brand. What’s covered is spelled out clearly in your quote and install documents so there are no fuzzy verbal promises. If something fails under warranty, we handle the claim and the repair.
Clear the work area: move vehicles, trim shrubs near the gate path, and note any underground sprinkler lines or invisible pet fences. If you have an HOA, confirm any gate style or height restrictions before the install date. We’ll handle utilities marking and all site prep; your job is just to make sure we can reach the work area.
Schedule Your Gate Installation Service in Orlando Today
Ready for a gate that actually fits your driveway, your security needs, and your budget? Call (877) 851-6955 for a free on-site estimate. Roland Thibodaux and the team at Arroyo Gate Repair will measure, quote, and install with pricing agreed before any work begins.
Written by Roland Thibodaux, Owner at Arroyo Gate Repair, serving Orlando and Central Florida with specialist gate installation, electric gate repair, and automated gate service.